No temperature change in simulation

I have recently been using laminarBuoyantPimpleSMOKE for a custom geometry.. basically a complete coflow (not in axisymmetric). Everything seems to be running fine and I got the solution for the problem. However, the temperature of the flame barely changed.. it sticks to around 300K and I tested it on the sample cases and the temperature were at 2200~K. I checked my constant folder and 0 folder but they seem to be alright to me. Plus, I used the sample cases (methane global case) as a guidance for my simulation. In that sample case, in paraview, the temperature rose to 2200K. I'm not sure why the temperature of simulation does not change (Although it does show visual variation). I will attached my case here.

I found the problem in my set up. The position of spark in solverOptions was at the wrong place. I fixed that and it was all good!